Each microphone kit contains:
Up to 6 Handheld Wireless Microphones (labeled 1–6; room dependent)
Up to 6 Lavalier Wireless Microphones (bodypacks, also labeled 1–6; room dependent)
AA Batteries
Important: Only use the microphones from this kit in the room. Do not use the in-room microphones, as this will cause frequency interference due to duplicated channels. |
Each handheld and lavalier in the kit shares a matched frequency with one of the receivers. They are essentially interchangeable, but only one mic per frequency should be turned on at a time.
Each mic (handheld and lavalier) are labeled 1, 2, 3, 4, 5 or 6.
A handheld and lavalier with the same number use the same frequency
Only one mic per number should be active at a time. For example:
Speaker A prefers lavalier → Use Lavalier 1 → Keep Handheld 1 turned off
Speaker B prefers handheld → Use Handheld 2 → Keep Lavalier 2 turned off
Speaker C prefers handheld → Use Handheld 3 → Keep Lavalier 3 turned off
Speaker D prefers lavalier → Use Lavalier 4 → Keep Handheld 4 turned off
Follow the instructions for powering on the lavalier or handheld microphones here: https://answers.atlassian.syr.edu/wiki/x/NgF5CQ
Power off all microphones and bodypacks.
Return the kit microphones to their designated spots within the kit.
Leave existing in-room microphones in the classroom/event space.
Return the kit to Lyman 104.
Do not turn on both a handheld and a lavalier that share the same frequency at the same time.
Do not use in-room mics alongside kit mics. This will cause signal interference.
Ensure batteries are replaced before use to ensure they remain charged throughout the event.