Camera (video conference)

  • A room-facing camera is located under the HD Display Screen. It can be accessed through videoconferencing software (Microsoft Teams, Zoom etc...) when using the Presenter PC.  

camera

Computer speakers

  • Speakers are built-in to the HD Display Screen.  
  • They can be accessed via the Presenter PC (Settings->System->Sound) or HDMI input on your personal device. 

computer speakers device

  • Volume can be adjusted via the Media Controller under Volume.  

computer speakers volume

Conference phone capable

  • Located at the Circulation desk (Bird library, first floor), the conference phone can be checked out, along with your room key, at the time of the event.

conference phone bagconference phone

  • Locate an Ethernet port in the room to connect the phone to (see Network). Connect the provided Ethernet cable to the Ethernet port.

ethernet cable

  • Connect the USB-C-to-Ethernet adapter to the USB-C port on the back of the phone. Then, connect the Ethernet cable to the Ethernet port on the adapter.

conference phone usb-c portconference phone usb-c to ethernet adapterconference phone ethernet connected

  • The screen may flash for a second, then you'll see the boot screen while the phone is starting (takes about a minute). Once finished booting, the main screen will show up displaying the conference phone's phone number.

conference phone boot screenconference phone main screen

  • Instructions on how to start a conference call is located here.
  • An overview of the phone schematics and instructions is located here.
  • Additional wired microphones (with Mute buttons) are available with the phone, they connect to the ports located on the left and right side of the phone. You can extend the microphones up to 7 feet (2.13m) from the phone. For best results, place the microphones between 3 feet (0.91 m) and 7 feet (2.1 m) away from the phone. 

conference phone additional microphonesconference phone wired microphones port

HD Display screen

  • Located in the front of the room, mounted on the wall.  

hd display screen

  • The display can be turned On and Off from the Media Controller under Display.  

hd display screen on off

HDMI

  • Located on the Media Controller, an HDMI input is available to connect personal devices to the HD Display Screen. 

hdmi port

  • Select HDMI from the Media Controller to activate the input.  

hdmi input

Keyboard and mouse (wireless)

  • A wireless keyboard and mouse are located in the room on the desk. On/Off switches are located on the top-right side of the keyboard and the under-side of the mouse.  

wireless keyboard mousewireless keyboard mouse on off

  • Remember to switch both devices off to preserve battery.  
  • No setup is necessary. If either device does not respond, try replacing the battery (spare batteries?).  

Media controller (non-touch panel)

  • Located on the wall (underneath the HD Display Screen), this is used to control the input of the devices available in the room.  

media controller

  • An HDMI, two USB ports and an Ethernet port are available. 

media controller ports

Microphone (room)

  • Room microphone is located on the ceiling of the room and available through videoconferencing software (Microsoft Teams, Zoom etc...) when using the Presenter PC. 

room microphone

Network (wired, wireless)

  • An Ethernet port is located on the Media Controller.

ethernet port

Presenter PC

  • A Windows PC is available behind the HD Display Screen. 

presenter pc

  • You can log in using your NetID and password or via the Guest account.  
  • Software list 

Videoconferencing software settings

  • When using videoconferencing software, the device settings should be set as followed: 
    • Camera – PTZ Pro Camera
    • Speaker – SHARP HDMI
    • Microphone – Line (USB AUDIO CODEC)