1. Connect to the Syracuse University network using the SURA VPN client.
  2. Navigate to the folder that contains the Cisco IP Communicator client.
  3. Right-click on the file CiscoIPCommunicatorSetup.exe and left-click on Run as Administrator.

  4. Select your preferred language and click OK.
  5. Click Next.
  6. Click Next.

  7. Click Next.

  8. Click Install.

  9. Make sure the Launch Cisco IP Communicator box is checked. Click Finish.
  10. Click Next.

  11. Select your Headset, Speakerphone, Handset, and Ringer using the drop-down arrow on the right side of each field. Click Next.
  12. Click Play and adjust your listening volume to your satisfaction using the Master and Wave sliders. Click Next.
  13. Adjust the microphone volume by following the instructions in the dialog box. Should you wish to hear your test, check the Playout check box and then click Test. Repeat this step as necessary to adjust microphone settings to your preference.
  14. When you see this screen, click Finish.
  15. Click the radio button Use this Device Name. Enter the device name provided by your manager or Syracuse University Telecommunications. If you are unsure, call 315-443-1887.

    1. Under TFTP Servers, select Use these TFTP servers. Enter the following numbers in the fields provided:
      TFTP Server 1:    128.230.160.10

      TFTP Server 2:    128.230.160.11


    2. Click OK.

  16. It may take some time for your IP Communicator client to register. You will know the client is ready when you see your phone number appear in the upper right-hand corner.