Versions Compared

Version Old Version 6 New Version Current
Changes made by

Andrew Wowelko

Gianna Mangicaro

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Figure 1_DVD VCRImage RemovedThere are multiple ways to view DVD sources within a classroom. This document will give instructions on play DVDs, VHS tapes,

The following provides instruction on how to play DVDs and Blu-Ray discs with

the appropriate technology. Included are instructions for DVD/VCR players,

Blu-Ray players

, and the Windows computer.

Table of Contents

 

 

DVD/VCR Players

 

Figure 1_DVD VCRImage Removed

 

 

 

 

 

 

 

 

 

 

If a DVD/VCR combo unit is in the classroom, VHS tapes or DVD's can be played off of this device. To use this device, follow these instructions:

  • Turn on the technology system
  • Select DVD/VCR as the projected source
    • A command should be sent to turn on the DVD/VCR player 
  • Press the eject button on the DVD/VCR (See: Figure 1.2_DVD VCR_Insert)
    Figure 1.2_DVD VCR_InsertImage Removed
  • Insert the disc or tape and press the eject button again to close the device
  • Make sure that the DVD/VCR player is in the correct mode (See: Figure 1.3_DVD VCR_Select Mode)
    • DVD or Video, will need to be selected 
    Figure 1.3_DVD VCR_Select ModeImage Removed
  • Use the controls on the player, to Play/Pause/Stop/Rewind/Fast-Forward the video being projected (See: Figure 1.3_DVD VCR_Select Mode)
  • Controls may also be found on the Touch Panel, if one is present in the room. (See: Figure 2_Touch Panel_DVD Controls)
     Figure 2_Touch Panel_DVD ControlsImage Removed
  • A remote controller can also be found in the accessory drawer located on the teaching station or on the technology rack in the room.

Blu-Ray Players

Figure 3_Blu-Ray PlayerImage Removed

Newer rooms may include a Blu-Ray player in the technology system.

in registrar classrooms.

Blu-Ray Players

Rooms may include a Blu-Ray player in the technology system. The Blu-Ray player bay be located under the desk of the teaching station or in the technology rack. These players are able to play both DVDs and Blu-Rays. It is recommended, that if present, the Blu-Ray is used to play DVDs. The following instructions explain how to use this device:

  1. Turn on the technology system at the Extron touch panel.

  2. Select Blu-Ray as the projected source

  • A command should be sent to turn on the Blu-Ray player 
Press the eject button on the Player

  1. on the Touch Panel (See: Figure

3.

  1. 2

_

  1. Touch Panel Blu-Ray

_Disc Insert

  1. Control)

  • Insert the disc or tape and press the eject button again to close the device
    Figure 3.2_Blu-Ray_Disc InsertImage Removed
  •  A remote controller can also be found in the accessory drawer located on the teaching station or on the technology rack in the room.
  • Controls may also be found on the Touch Panel, if one is present in the room. (See: Figure 4_Touch Panel_Blu-Ray Controls)  
    Figure 2_Touch Panel_Blu-Ray ControlsImage Removed

    • Playing DVDs with the Windows Computer

    Figure 5_Windows Computer_DVD PlayerImage Removed

    For rooms that do not include a Blu-Ray or DVD/VCR player, the Windows Computer can be used to play DVDs. The following instructions explain how to use the Windows Computer as a DVD player:  

  • Turn on the technology system
  • Select PC as the projected source
    • The user will have to manually turn on the PC as a command is not sent when turning on the technology system 
    • Press the eject button on the PC, which is found on the front of the DVD Rom. (See: Figure 5.2_Windows Computer_DVD Insert)
     Figure 5.2_Windows Computer_DVD InsertImage Removed

    1. .

      1. A command should be sent to turn on the Blu-Ray player. If it does not turn on, check to see if the power is on at the Blu-Ray player.

    2. Press the eject button on the Player (See: Figure 3 Blu-Ray Disc Insert)

    3. Insert the disc or tape and press the eject button again to close the device

    . (See: Figure 5_Windows Computer_DVD Player)
  • Note: There are no controls on the Touch Panel or physical controls on the PC to control the video source
  • An application on the PC will need to be used to play and control the DVD/Video source
  • Once the disc is inserted, log into the Windows Computer
  • Search for the application "VLC" in the lower menu of the Windows Computer and open the application (See: Figure 6_Windows Computer_VLC)
    Figure 6_Windows Computer_VLCImage Removed
  • Use the virtual buttons on the VLC application to play and control the video (See: Figure 6.2_Windows Computer_VLC Interface)
    Figure 6.2_Windows Computer_VLC InterfaceImage Removed
  • Volume can be controlled within the VLC application, on the Touch Panel, or on the Window Computer audio settings. (See: Figure 6.3_Windows Computer_Audio Settings)
    Figure 6.3_Windows Computer_Audio SettingsImage Removed
    •  

    2. Use the controls on the touch panel to play, rewind, fast forward, stop, and select from the menu items.

    3. When complete, eject your disk at the Blu-Ray player.

    4. Before leaving, turn the system off.

    Note:

    • A remote controller can typically be found in the accessory drawer located on the teaching station or on the technology rack in the room.

    Info

    If the technology does not function as described please call 315

    -

    .443

    -

    .2677 for assistance. 

     
    Figure 3_Blu-Ray PlayerImage AddedFigure 2_Touch Panel_Blu-Ray ControlsImage AddedFigure 3.2_Blu-Ray_Disc InsertImage Added