Apple TV (screen mirroring)
Assisted listening device
Image Removed- These devices receive all audio being projected in the room speakers and can be worn by users with hearing disabilities. Users have the ability to control volume and listen through an earpiece (3.5mm jack) that is connected to the body pack receiver.
- Located in the first cabinet door on the left right side, the assisted listening device can be turned on/off by sliding the wheel to the left (out of the OFF position).
Image Removed
Image Removed
- Use the SEEK button or Channel Select buttons if you're unable to hear any sound. The device should be on channel IR #1?, 2F? Where's the receiver?
- holding the Power button on top for a few seconds. Pressing the Power button while ON will display device information, including battery levels and device channel.
Image Added
Image Added
- Insert headphones in either of the two ports on top.
- The device should be on channel CH-1.
Image Added
- Use the up/down arrow buttons to adjust sound.
Image Added
- A charging cable is available in the same drawer as the device.
Image Added
- Remember to switch the device off to preserve the battery.
Blu-ray, DVD, VHS player
- The DVD and VHS players are located in the first cabinet door on the right side. The Blu-Ray player is located under the Teaching Station towards the left side.
Image Removed
Image Removed
Image Added
Image Added
- All three devices can be selected via the Media Controller's input selection under Blu-ray or DVD/VCR.
Image Removed
Image Added
- Remote controls are located in the first cabinet door on the right, under the DVD and VHS players.
Image Removed
Image Added
Camera (video conference)
- There are two cameras in the room, one located in the front wall behind the Teaching Station. The second camera is located in the middle-right side of the room when looking towards the back of the room.
Image Removed
Image Removed
Image Added
Image Added
- The cameras can be accessed via the Media Controller's input selection under Camera Controls and will be available through videoconferencing software (Microsoft Teams, Zoom etc...) when using the Presenter PC.
Image Removed
Image Removed
Image Added
Image Added
Communication Access Real-time Translation (CART)
- Event coordinator must schedule CART services.
Computer speakers
- Speakers are mounted on each side of the front wall.
Image Removed
Image Added
- They can be accessed via the Presenter PC (Settings->System->Sound) or HDMI input on your personal device.
Image Removed
Image Added
- Volume can be adjusted via the Media Controller's Main Volume buttons.
Image Removed
Image Added
Conference phone capable
Pending... - Located at the Circulation desk (Bird library, first floor), the conference phone can be checked out, along with your room key, at the time of the event.
Image Added
Image Added
- Locate an Ethernet cable in the room to connect the phone to (see Network).
- Connect the USB-C-to-Ethernet adapter to the USB-C port on the back of the phone. Then, connect the Ethernet cable to the Ethernet port on the adapter.
Image Added
Image Added
Image Added
- The screen may flash for a second, then you'll see the boot screen while the phone is starting (takes about a minute). Once finished booting, the main screen will show up displaying the conference phone's phone number.
Image Added
Image Added
- Instructions on how to start a conference call is located here.
- An overview of the phone schematics and instructions is located here.
- Additional wired microphones (with Mute buttons) are available with the phone, they connect to the ports located on the left and right side of the phone. You can extend the microphones up to 7 feet (2.13m) from the phone. For best results, place the microphones between 3 feet (0.91 m) and 7 feet (2.1 m) away from the phone.
Image Added
Image Added
Confidence monitor
- Located in the middle-right side of the room when looking towards the back, can be accessed via the Media Controller's input selection under Confidence Monitor.
Image Removed
Image Removed
Image Removed
Image Added
Image Added
Image Added
- This monitor will allow the user to view the source that they have displayed on the projector/display, while facing the audience.
HD projector
- Mounted on the ceiling towards the front of the room.
Image Removed
Image Added
- Can be accessed via the Media Controller's input screen under Projector, with On/Off and Video Mute (stops displaying content on the Projection Screen) options.
Image Removed
Image Added