The three projectors use special software to merge and blend the displays into one large display.
Login to computer using arch-224 account
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Create your content at this resolution: 5760 x 1080. Use a minimum 20 pt font size to keep text legible. |
Turn on the projectors
Double click the Epson Projector Management icon on the desktop.
Enable all three projectors with using the checkboxes, then click Power > On
Wait for the projectors to turn on. The desktop will look misaligned. This is normal and is fixed later.
Photo of misalignment
Go on to the next section.
Start Immersive Display
Double click the Immersive Display icon on the desktop.
In the main window, left click anywhere on the strip with the three projectors. A long popup list will appear. Click External calibration (.procalib).
Photo
In the file selection window, select the file ‘calibration ‘calibration 250218a.procalib’ procalib’ and click Open. Nothing will appear to change.
Now click the ‘Enable Desktop Warping’ button.
The screen will flicker and change into blended mode. You can now move your content to the merged display.
Please do not change the resolution, disable the AMD Eyefinity group, or physically move the projectors, as this will wreck the calibration.
Turn off the projectors
First make sure to Disable Desktop Warping in Immersive Display. Then quit Immersive Display.
Double click the Epson Projector Management icon on the merged display.the desktop.
Enable all three projectors using the checkboxes, then click Power > Off.
Wait for the projectors to turn off.
Troubleshooting
Starting Immersive Display gives an error “Displays configuration mismatch!”.
Solution: make sure the three projectors are turned on before you start Immersive Display.
21-Feb-2025