...
| Info | ||
|---|---|---|
| ||
Many IDE internal hard disks contain jumper pins that you must set to designate a hard disk as a primary (master) disk where you install Windows or as a secondary (subordinate) disk where you store programs and files. These jumpers are small plastic sleeves that you must place on the correct metal jumper pins. For additional instructions, check the information that came with the internal hard disk. |
| Infowarning | ||
|---|---|---|
| ||
Make sure that any time you are doing any internal work on a computer of any kind that you have a proper working area. That can include electrostatic discharge mats or wristbands, proper lighting and if necessary, ventilation. You never want to perform internal repairs while the power source is still connected as this can not only potentially cause hardware failure from discharge, but also can be a bodily hazard by electric shock! After you disconnect the power source, hit the power button several times to discharge any lingering electricity in the system before you begin. |
...