- Located on the Teaching Station, this is used to control the input of the devices available in the room via its touchscreen.
Image Removed
Image Added
Microphone (wireless handheld, lapel, room)
- Wireless handheld and lapel microphones are located in the first cabinet door from the left.
Image Removed
Image Added
- Hold down the Power/On-Off button for a few seconds to turn on and off.
Image Removed
Image Removed
Image Added
Image Added
- Microphones should be on the following frequencies (as noted on the receivers in the second cabinet door from the left):
- Lapel WL-1 - 646.100 MHz
- Handheld WL-2 - 659.150 MHz
- Handheld WL-3 - 473.600 MHz
- Handheld WL-4 - 486.100 MHz
- Remember to turn microphones off to preserve batteries.
- Replacement batteries are located in the same cabinet door as the microphones.
- Microphone volumes can be adjusted via the Media Controller panel under Microphone.
Image Removed
Image Added
- Room microphones are located on the ceiling of the room and available through videoconferencing software (Microsoft Teams, Zoom etc...) when using the Presenter PC.
Image Removed
Image Added
- Additional/relevant information located here.
Network (wired, wireless)
- An Ethernet cable is available on the Teaching Station for wired connectivity.
Image Removed
Image Added
Presenter PC
- A Windows PC is available on the Teaching Station. The actual computer is located in the first cabinet door from the left.
Image Removed
Image Removed
Image Added
Image Added
- You can log in using your NetID and password or via the Guest account.
- Software list
Projection screen (retractable)
- Located in the front wall of the room, the retractable screen can be controlled from the Media Controller under Screen Control.
Image Removed
Image Removed
Image Removed
Image Added
Image Added
Image Added
Teaching station (movable)
- Located in the front of the room, you'll find the movable Teaching Station along with the Presenter PC, the Media Controller panel, the Document Camera, several input cables for personal devices (HDMI with USB-C and mini DisplayPort, Ethernet, VGA) and an outlet port for power.
Image Removed
Image Removed
Image Added
Image Added
Anchor |
---|
| videoconference |
---|
| videoconference |
---|
|
Videoconferencing software settings
- When using videoconferencing software, the device settings should be set as followed:
- Camera – Quick-Connect USB
- Speaker – Intel(R) Display Audio HDMI 1
- Microphone - Microphone (USB Audio CODEC)
VGA
- Located on the Teaching Station, a VGA cable is available to connect older mobile devices to the projection screen.
Image Removed
Image Added
- The input can be accessed via the Media Controller under Laptop.
Image Removed
Image Added
- A VGA to mini DisplayPort adapter is available in the drawer inside the first cabinet door from the left.
Image Removed
Image Added
Wacom monitor/tablet
- The Presenter PC screen doubles as a Wacom tablet with a digital pen attached on the right side to use as an input device with appropriate software. The screen also responds to touch.
Image Removed
Image Removed
Image Added
Image Added