...

• Teaching Station Monitor - Similar to the above display options, these will change the output of the monitor on the teaching station relative to the highlighted option.
• Left/Right Front/ Right Middle - Selecting the options below these headings will change the display of the mobile monitors located throughout the room.

...

• (

...

The Extron Panel has been broken down and labeled below.

Image Removed

To operate the projector, first hit the "ON" button in the Display controls.  

Then select your video input, either laptop, AUX Video, or YUV VID.

NOTE:  There is NO Local PC Connection in 011. 

Finally, set the classroom volume to the preferred level by moving the volume knob to a comfortable level.

The Video Input Panel

011 does feature a second panel, located to the left on the teaching station, which is where the physical connection for the devices to be projected are located.  

Image Removed

If the desired input is a laptop attach the VGA and audio connections to your laptop, and select "Laptop" on the Extron Video Input Selection.

The AUX Video and HD Component inputs can connect electronics which have Auxilery or HD Component video outputs (Most DVD players, VCRs, Video Cameras, video game systems etc.) 

• The AUX Video input has three connections, Video (yellow) and Audio (white and red - for left and right, respectively).
• The HD Component input has 5 connections, Video (Red, Green, and Blue - located on the top) and Audio (red and white, located at the bottom)

Connect all of the wires into their respective input ports in order to project the device over the main projector.  

Select "AUX Video" on the Extron Panel for an AUX VIdeo Connection

Select "YUV VID" on the Extron Panel for an HD Component Connection.

...

• The Inputs for these Monitors are location on the walls near outlets)

Other Instructional Resources

...